RTS DV-3400 Technical Information PDF herunterladen (Seite 457)

100

101

File Transfers

Transferring Switch Configurations and ACL Command Files

Xmodem: Copying a Configuration File from the Switch to

a Serially Connected PC or UNIX Workstation

To use this method, the switch must be connected via the serial port to a PC

or UNIX workstation. You will need to:

■ Determine a filename to use.

■ Know the directory path you will use to store the configuration file.

Syntax: copy < startup-config | running-config > xmodem < pc | unix >

copy config < filename > xmodem < pc | unix >

All Switches: Uses Xmodem to copy a startup-config or

running-config file from the switch to a PC or Unix

workstation.

5300xl and 4200vl: A 5300xl switch running software release

E.09.xx or greater, or a 4200vl switch, uses Xmodem to copy

a designated configuration file from the switch to a PC or Unix

workstation. For more on multiple configuration files, refer to

“Multiple Configuration Files on 5300xl and 4200vl Switches”

on page 6-22.

For example, to copy a configuration file to a PC serially connected to the

switch:

1. Determine the file name and directory location on the PC.

2. Execute the following command:

3. After you see the above prompt, press

[Enter].

4. Execute the terminal emulator commands to begin the file transfer.

Xmodem: Copying a Configuration File from a

Serially Connected PC or UNIX Workstation

To use this method, the switch must be connected via the serial port to a PC

or UNIX workstation on which is stored the configuration file you want to

copy. To complete the copying, you will need to know the name of the file to

copy and the drive and directory location of the file.

A-27

1 2 ... 452 453 454 455 456 457 458 459 460 461 462 ... 579 580

Kommentare zu diesen Handbüchern

Keine Kommentare

RTS DV-3400 Technical Information Seite 457

Kommentare zu diesen Handbüchern