RTS DV-3400 Technical Information PDF herunterladen (Seite 437)

100

101

File Transfers

Downloading Switch Software

1. Execute copy as shown below:

Dynamic counter continually displays the

number of bytes transferred.

This message means that the image you

want to upload will replace the image

currently in primary flash.

Figure A-3. Example of the Command to Download an OS (Switch Software)

2. When the switch finishes downloading the software file from the server,

it displays this progress message:

Validating and Writing System Software to FLASH …

3. When the download finishes, you must reboot the switch to implement

the newly downloaded software image. To do so, use one of the following

commands:

Syntax:

boot system flash < primary | secondary >

Boots from the selected flash.

Syntax:

reload

Boots from the flash image and startup-config file. On a

5300xl switch running software release E.09.xx or greater

(with multiple configuration files), also uses the current

startup-config file.

(For more on these commands, refer to “Rebooting the Switch” on page

6-18.)

4. To confirm that the software downloaded correctly, execute show system

and check the Firmware revision line.

If you need information on primary/secondary flash memory and the boot

commands, see “Using Primary and Secondary Flash Image Options” on page

6-13.

A-7

1 2 ... 432 433 434 435 436 437 438 439 440 441 442 ... 579 580

Kommentare zu diesen Handbüchern

Keine Kommentare

RTS DV-3400 Technical Information Seite 437

Kommentare zu diesen Handbüchern