RTS DV-3400 Technical Information PDF herunterladen (Seite 295)

100

101

Port Trunking

Overview

Port Connections and Configuration: All port trunk links must be point-

to-point connections between a switch covered by this guide and another

switch, router, server, or workstation configured for port trunking. No inter-

vening, non-trunking devices are allowed. It is important to note that ports on

both ends of a port trunk group must have the same mode (speed and duplex)

and flow control settings.

Note Link Connections. The switch does not support port trunking through an

intermediate, non-trunking device such as a hub, or using more than one media

type in a port trunk group. Similarly, for proper trunk operation, all links in

the same trunk group must have the same speed, duplex, and flow control.

Port Security Restriction. Port security does not operate on a trunk group.

If you configure port security on one or more ports that are later added to a

trunk group, the switch resets the port security parameters for those ports to

the factory-default configuration.

Caution To avoid broadcast storms or loops in your network while configuring a

trunk, first disable or disconnect all ports you want to add to or remove from

the trunk. After you finish configuring the trunk, enable or re-connect the

ports.

13-3

1 2 ... 290 291 292 293 294 295 296 297 298 299 300 ... 579 580

Kommentare zu diesen Handbüchern

Keine Kommentare

RTS DV-3400 Technical Information Seite 295

Kommentare zu diesen Handbüchern