RTS DV-3400 Technical Information PDF herunterladen (Seite 372)

100

101

Configuring for Network Management Applications

Using SNMP Tools To Manage the Switch

Using the CLI To List Current SNMP Trap Receivers.

This command lists the currently configured trap receivers and the setting for

authentication traps (along with the current SNMP community name data —

see “SNMPv3 Communities” on page 15-11).

Syntax: show snmp-server

Displays current community and trap receiver data.

In the next example, the show snmp-server command shows that the switch

has been previously configured to send SNMP traps to management stations

belonging to the “public”, “red-team”, and “blue-team” communities.

Example of

Community

Name Data (See

page 15-11.)

Example of Trap

Receiver Data

Authentication

Trap Setting

Figure 15-9. Example of Show SNMP-Server Listing

Configuring Trap Receivers. This command specifies trap receivers by

community membership, management station IP address, and the type of

Event Log messages to send to the trap receiver.

Note If you specify a community name that does not exist—that is, has not yet been

configured on the switch—the switch still accepts the trap receiver

assignment. However, no traps will be sent to that trap receiver until the

community to which it belongs has been configured on the switch.

15-20

1 2 ... 367 368 369 370 371 372 373 374 375 376 377 ... 579 580

Kommentare zu diesen Handbüchern

Keine Kommentare

RTS DV-3400 Technical Information Seite 372

Kommentare zu diesen Handbüchern