RTS DV-3400 Technical Information PDF herunterladen (Seite 157)

100

101

Interface Access and System Information

Interface Access: Console/Serial Link, Web, and Inbound Telnet

All console parameter changes except events require that you save the config-

uration with write memory and then execute boot before the new console

configuration will take effect.

For example, to use one command to configure the switch with the following:

■ VT100 operation

■ 19,200 baud

■ No flow control

■ 10-minute inactivity time

■ Critical log events

you would use the following command sequence:

The switch implements the Event Log change immediately. The switch implements

the other console changes after executing

write memory and reload.

Figure 7-3. Example of Executing the Console Command with Multiple Parameters

You can also execute a series of console commands and then save the

configuration and boot the switch. For example:

Configure

the

individual

parameters.

Save the

changes.

Boot the

switch.

Figure 7-4. Example of Executing a Series of Console Commands

7-7

1 2 ... 152 153 154 155 156 157 158 159 160 161 162 ... 579 580

Kommentare zu diesen Handbüchern

Keine Kommentare

RTS DV-3400 Technical Information Seite 157

Kommentare zu diesen Handbüchern