RTS DV-3400 Technical Information PDF herunterladen (Seite 146)

100

101

Switch Memory and Configuration

Multiple Configuration Files on 5300xl and 4200vl Switches

• Boots the switch from primary flash using the new (default) configu-

ration in the startup-config file in memory slot 1. Since the primary

flash in this instance does not support multiple configuration files,

the multiple configuration feature does not operate until the switch

is booted again using software release E.09.xx or greater.

This scenario does not affect any startup-config files in memory slots 2 or

3, and does not change the active, primary, and secondary assignments

the switch is maintaining in the configuration for software release E.09.xx

or greater. (Note that the same applies if the switch is running on the

software release earlier than E.09.xx in primary flash.)

■ Scenario 2: If the primary flash location has a software version that

supports multiple configuration files (release E.09.xx or greater), then the

switch:

• Overwrites the content of the startup-config file currently in memory

slot 1 with the default configuration for the software version in

primary flash, and renames this file to config1.

• Erases any other startup-config files currently in memory.

• Configures the new file in memory slot 1 as the default for both

primary and secondary flash locations (regardless of the software

version currently in secondary flash).

• Boots the switch from primary flash using the new startup-config file.

When the software version in the primary flash

supports multiple configuration files, pressing

Clear + Reset:

– Replaces all startup-config files with a single

file named config1 that contains the default

configuration for the software version in

primary flash.

– Resets the Active, Primary, and Secondary

assignments as shown here.

Figure 6-24. Example of Clear + Reset Result from Scenario 2 on Page

6-36

1 2 ... 141 142 143 144 145 146 147 148 149 150 151 ... 579 580

Kommentare zu diesen Handbüchern

Keine Kommentare

RTS DV-3400 Technical Information Seite 146

Kommentare zu diesen Handbüchern