RTS DV-3400 Technical Information PDF herunterladen (Seite 138)

100

101

Switch Memory and Configuration

Multiple Configuration Files on 5300xl and 4200vl Switches

— Continued from the previous page. —

In the default configuration:

• If the switch was shipped from the factory with software

release E.09.xx installed in both the primary and

secondary boot paths, then one startup-config file named

config1 is used for both paths and is stored in memory slot

1. Memory slots 2 and 3 are empty in this default

configuration.)

• If the switch is running a software version earlier than

E.09.xx and you download software version E.09.xx or

greater to one of the boot paths, then the startup-config file

in memory slot 1 supports the pre-E.09.xx software version

and the startup-config file in memory slot 2 supports the

E.09.xx (or greater) software version. (In this case, the

default filename in memory slot 1 is oldConfig and the

default filename in slot 2 is workingConfig. Memory slot 3

is empty in the default configuration.

For example, after downloading software version E.09.xx or greater to the

secondary flash in a 5300xl switch running software earlier than E.09.xx in

primary flash, show config files displays the following:

When you download software release E.09.xx for the first time and boot on this release, the

switch places a copy of the oldConfig startup-config file in memory slot 2 and renames it

workingConfig. This display shows that the workingConfig file in memory slot 2 and:

• Is the currently active configuration

• Is invoked when the switch boots with the software image in either the primary or

secondary boot path.

As this example shows, you must reconfigure either the primary or the secondary boot path

if you want to boot the switch using the startup-config file in another memory slot.

(You can also change the above filenames. Refer to “Renaming an Existing Startup-Config

File” on page 6-32.)

Figure 6-20. Example of Displaying the Current Multiple Configuration Status

6-28

1 2 ... 133 134 135 136 137 138 139 140 141 142 143 ... 579 580

Kommentare zu diesen Handbüchern

Keine Kommentare

RTS DV-3400 Technical Information Seite 138

Kommentare zu diesen Handbüchern