RTS DV-3400 Technical Information PDF herunterladen (Seite 145)

100

101

Switch Memory and Configuration

Multiple Configuration Files on 5300xl and 4200vl Switches

Figure 6-23 illustrates using erase config < filename > to remove a startup-config

file.

Figure 6-23. Example of Erasing a Non-Active Startup-Config File

With the same memory configuration as is shown in the bottom portion of

figure 6-23, executing erase startup-config boots the switch from primary flash,

resulting in a new file named minconfig in the same memory slot. The new file

contains the default configuration for the software version currently in pri-

mary flash.

Using the Clear + Reset Button Combination To Reset

the Switch to Its Default Configuration

The Clear + Reset button combination described in the Installation and

Getting Started Guide produces different results, depending on which soft-

ware release is stored in primary flash. That is, when you press the Clear +

Reset button combination:

■ Scenario 1: If the primary flash location has a software release that does

not support multiple configuration files (that is, earlier than E.09.xx) and

the switch is running on software release E.09.xx or greater in secondary

flash, then the switch:

• Overwrites the content of the startup-config file currently in memory

slot 1 with the default configuration for the software version in

primary flash. (The filename does not change.)

6-35

1 2 ... 140 141 142 143 144 145 146 147 148 149 150 ... 579 580

Kommentare zu diesen Handbüchern

Keine Kommentare

RTS DV-3400 Technical Information Seite 145

Kommentare zu diesen Handbüchern