RTS Cstrunk Spezifikationen Seite 81

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 104
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 80
75
Installation of the RVON-1 Card in a KP 812
To install the RVON-1 card, do the following:
1. Remove the cover from the KP 812 keypanel.
NOTE: It is recommended to seat the RVON-1 card on the J2 connector located on the KP 812
motherboard before snapping the RVON-1 board onto the spacers. Be careful to attach J2 to J37
correctly.
2. Gently secure the RVON-1 board in place.
NOTE: Be sure the orientation of the board is correct, otherwise undesirable effects may occur. Make sure
the RJ-45 connection is positioned so it will connect correctly to the RJ-45 connector:
FIGURE 11. Spacer placement on KP 812 motherboard
FIGURE 12. J2 Connector on the KP 812 Board
Seitenansicht 80
1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 103 104

Kommentare zu diesen Handbüchern

Keine Kommentare