RTS Cstrunk Spezifikationen PDF herunterladen (Seite 45)

Removing the solo key option

To remove the solo key option, do the following:

1. Select Solo, and then tap PGM.

The LEDs for the solo key will be lit red.

2. Tap the solo key to turn off the LEDs.

3. Tap CLR to exit.

The solo key is now cleared.

4. Run Service Menu, Save Cfg, to save the change.

RVON Conn. Menu

The RVON Conn. menu is used to select an RVON connection to use with the keypanel.

NOTE: This menu item only appears when you have the RVON option installed and there are RVON devices available.

To select an RVON connection, do the following:

1. Select RVON Conn.

2. Tap PGM.

A list of available RVON connections appears in a scrollable list.

3. Using the ↓↓ or ↑↑, scroll to the connection you want to use.

4. Tap PGM.

5. Tap CLR to exit when finished.

The RVON Connection is set.

6. Run Service Menu, Save Cfg to store the RVON Conn. setting.

Service Menu

Service Menu, Aux Inputs (GPI Option Only)

Enables or disables an AUX input audio path to any outputs.

1. Select Aux Inputs, and then tap PGM.

Aux In 1 displays. To select Aux In 1 or 2, press

↓↓

↑↑

2. Tap PGM.

♦

Enabled displays. To select enabled or disabled, press

↓↓

↑↑

. The arrow indicates that the input is enabled.

3. Tap PGM.

4. Tap CLR to exit when finished

The new Aux In assignment is now set.

5. Run Service Menu, Save Cfg, to store the Aux Inputs setting.

NOTE: To assign the destination of the Aux Inputs, see “Mixing” on page 42.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 103 104

Keine Kommentare

RTS Cstrunk Spezifikationen Seite 45