RTS Cstrunk Spezifikationen PDF herunterladen (Seite 21)

Continuous Red Talk LED & Flashing Display Alpha (“In-use”)*

The key is off, but someone is talking to the destination. This indication is provided for any local PL, IFB, ISO, or TIF key. It

does not apply to remote IFB or ISO keys. This indication is provided so keypanels operators know when critical director

communications are occurring. If you activate the key, either of two things will happen:

• If you activate the key and the talk LED turns continuous green, this indicates that you and the other keypanel

operator are both talking to the destination.

• IFB keys only: If the talk LED flashes red when an IFB key is activated, this indicates that the other keypanel has

a higher IFB priority and you cannot talk at this time.

NOTE: The red in-use indication for TIF keys can be disabled in AZedit: In the AZedit Options menu, select Intercom

Configuration, then click on the Options tab. Select Don't generate tallies for TIF and trunk use. Be sure to send

the change to the intercom system. Note that this will also disable the flashing alpha display when talking to

remote IFBs or ISOs as previously described.

Flashing Red Talk LED & Flashing Display Alternating Pattern of Alpha & (-**-) (“Busy”)

You cannot talk at this time. This indication occurs when you activate a local IFB key that is already in-use by a keypanel with

a higher IFB priority. It also occurs when you activate any key assigned to a remote destination, but there are currently no

trunks available.

NOTE: Flashing red is also the intended indication when attempting to talk to a remote IFB while someone else with a

higher trunk IFB priority is already talking. However, this will require ADAM MC version later than 9.9.x and

Trunk MC version later than 7.x.x. As of this writing, these versions are not implemented. Regardless of the

indication provided, you will not be heard at the remote location if your keypanel has the lower trunk IFB

priority. IFB trunk priorities are set in AZedit. (Click the KP button on the AZedit toolbar to access

Keypanels/Ports setup, then click the Edit button, then click the Advanced tab. Enter the desired IFB priority in

the fields provided. Be sure to send the change to the intercom system.)

Flashing Green Talk LED & Display Alpha (on time equal to off time)*

There is an incoming call from the destination assigned to the key. Activate the key to talk back.

NOTE: The duration of incoming call flash is controlled by DIP switch 4 on the KP-632 back panel. See “Option DIP

Switch Settings” on page 7 for further information.

Winking Green Talk LED (on time less than off time)*

This indicates that a key is ready to talk (key is ON), but requires external footswitch activation to talk.

Listen LED Indication

The listen LED is the upper LED for each key. The listen LED is green when listen is on.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 103 104

Keine Kommentare

RTS Cstrunk Spezifikationen Seite 21