RTS Cstrunk Spezifikationen PDF herunterladen (Seite 102)

set channel dest_ip

Allows you edit the destination IP Address the RVON-1 card will

communicate with

set channel dest_type

Allows you to edit the destination type for the device the RVON-1

card will talk with

set channel dest_channel

Allows you to edit the destination channel of the device the

RVON-1 will talk with

set channel channel_codec

Allows you to edit the CODEC to be used for transferring the data

between the two devices

set channel input_gain Allows you to edit the input gain for the RVON-1 card

set channel output_gain Allows you to edit the output gain for the RVON-1 card.

set the channel onhook

onhook = hang up

If the channel was already connected, going offhook will have no

effect (it is already offhook if connected). Going onhook will

hang up the call, and it should then try to reconnect.

If the channel was not already connected, going offhook will

cause it to try and establish a connection. Going onhook in this

stat will have no effect (it is already onhook if idle.

set channel offhook

offhook = connected

If the channel was already connected, going offhook will have no

effect (it is already offhook if connected). Going onhook will

hang up the call, and it should then try to reconnect.

If the channel was not already connected, going offhook will

cause it to try and establish a connection. Going onhook in this

state will have no effect (it is already onhook).

1 2 ... 97 98 99 100 101 102 103 104

Keine Kommentare

RTS Cstrunk Spezifikationen Seite 102