RTS XCP-24 Wartungshandbuch PDF herunterladen (Seite 65)

8-3

KP9X Dial Sequence

1 Activate the TIF listen key (listen LED green).

2 Make sure the TIF talk key is off (Talk LED off).

3 On the keypad, tap CLR-PHONE-PGM.

4 Activate the TIF talk key (talk LED turns green). The "ON" LED at the TIF-951 / TIF-2000

will activate, and you should hear dial tone at the KP-632.

5 Dial the telephone number. Digits scroll in the display above the TIF talk key.

6 When the far end answers, you can dial additional digits (to access a mail system or automated

response system, etc.). When finished dialing, momentarily turn off the TIF talk key to end

dialing mode (talk LED turns red).

7 Turn the TIF talk key back on for conversation.

KP9X Redial Sequence

1 Tap the PHONE key to activate dialing mode.

2 Tap "up" on the TIF key to activate listen.

3 Tap CLR 0 0 . The last phone number will redial.

4 After the number has dialed, click the PHONE key to end dialing mode.

5 If the far end answers, tap "down" on the TIF key to activate talk.

6 Use the KP9X hang-up sequence to hang up.

KP9X Autodial Sequences

Storing an Autodial Number in the TIF-951 / TIF-2000

1 Tap the PHONE key.

2 Tap the TIF talk key to latch it on.

3 Using the number keys on the keypad, dial the phone number that you want to store. The entire

phone number sequence can have up to 30 digits.

Note

To insert one or more pauses anywhere in the dialing sequence, enter CLR CLR 9 9 for each

pause.

4 After dialing the telephone number, click CLR PGM, then enter a two-digit number (01, 02,

etc. up to 32) that you will use as the autodial number.

5 After storing the autodial number, hang up using the KP9X hang-up sequence.

Dialing an Autodial Number Stored in the TIF-951 / TIF-2000

1 Tap the PHONE key to activate dialing mode.

2 Tap "down" on the TIF talk key to latch it in the on position.

3 Tap CLR followed by the autodial number (01, 02, etc.).

4 When finished dialing, click the PHONE key again to exit dialing mode.

5 Hang up using theKP9X hang-up sequence.

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 113 114

Keine Kommentare

RTS XCP-24 Wartungshandbuch Seite 65