RTS XCP-24 Wartungshandbuch PDF herunterladen (Seite 33)

5-3

Tone Generator Activation (FUNC-DISPLAY-7)

FUNC DISPLAY 7

This sequence activates the keypanel's internal tone generator. You can use the tone generator to

check the audio send and receive paths to and from the matrix. For example, you can assign a talk

key on the keypanel to talk to itself. When you activate the talk key, you should be able to hear

the tone from the keypanel speaker or from a headset.

To turn off the tone generator, press the CLR key.

Note

The microphone input is turned off when the tone generator is active.

Display Requests Using Scrolling

The display requests described previously can also be accessed using scrolling. Scrolling also

offers several additional features. To use scrolling, tap FUNC DISPLAY followed by ↓↓ or

−− to scroll through the list of display requests. The display request names will appear in the

Call waiting window as follows:

PGM: Displays the calculated port number. CLR to quit.

Lev2

PGM: Displays level 2 talk assignments. CLR to quit.

Lstn

PGM: Displays listen assignments. CLR to quit.

Name

PGM: Displays crosspoints closed to this keypanel. CLR to quit.

Type

PGM: Displays level 1 talk key assignment types. CLR to quit.

Mtx

PGM: Displays matrix ID for all level 1 talk assignments. CLR to quit.

Tone

PGM: Turns on tone generator. CLR to quit and turn off tone generator.

Epnl

PGM: Displays setup page assignments.

=KP-632 bottom row keys.

=KP-632 top row

key.

=EKP-632 bottom row keys.

=EKP-632 top row keys.

Gain

PGM: After selecting this item, tap up on any listen key with a point-to-point or party line

assignment. The current listen gain from this keypanel to the intercom port or party line displays

in the Call waiting window. Tap ↓↓ or − − to change the gain. CLR to quit. Use

VRst

PGM

to reset all gains.

VRst

PGM: Reset all port / party line gains to 0dB.

Asgn

PGM: Displays a list of key assignments that are set up for this keypanel, but not currently

accessible. This includes talk level 1 assignments on setup pages that are not currently assigned,

and any key assignment that might be obscured by the call-waiting window. You can scroll

through the list using the ↓↓ − − keys. Then use the Call waiting key to talk to any of the

listed destinations.

Test

PGM: Test keys and displays. CLR to quit.

Vxxx

: Display keypanel firmware version. CLR to quit.

KEYPAD PROGRAMMING, ASSIGNING SETUP PAGES

1 Tap the E-PNL key.

2 Select one of the four setup pages: tap 1 , or 2 , etc.

3 Tap the PGM key.

4 Tap any key in the row of keys where you want to assign the setup page.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 113 114

Kommentare zu diesen Handbüchern

Keine Kommentare

RTS XCP-24 Wartungshandbuch Seite 33

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Türsprechanlagen RTS XCP-24