RTS XCP-24 Wartungshandbuch PDF herunterladen (Seite 51)

6-13

Service Menu, LCD Bright

This item allows you to adjust the brightness of the LCD backlighting so that the unit’s display

can be viewed in a wide range of ambient room light conditions.The

All

selection controls the

overall LCD brightness level including the right LCD on the KP-632. The

Main

selection controls

the left LCD on the KP-632. The

EXP1

controls the LCD on the EKP-632. Normally the LCD

brightness levels are balanced at the factory before shipping, thus under normal circumstances the

All

selection should be used.

1 Select

LCD Bright,

then tap PGM.

All

displays. To change the selection, press ↓↓ or −− to move through the

All

Main

, and

EXP1

selections.

Tap PGM.

4 If the

All

selection was made proceed to step 6. If

Main

was selected

Left

will appear. If

EXP1

was selected press ↓↓ or −− to move through the

Left

and

Right

selections.

5 Tap PGM.

Value: X

displays where x is a number between 5 and 100.

7 To change the selection, press ↓↓ or −−. The higher the number, the brighter the backlight.

8 Tap PGM.

9 Tap CLR to exit.

10Run Service Menu, Save Cfg, to store the new setting.

Service Menu, LCP-632

By default, each LCP-632 that you connect to the KP-632 takes control of level adjustment for the

first available group of 16 physical keys that it finds. The first LCP-632 adjusts keys 1-12, which

corresponds to the bottom row of keys on the KP-632; the second LCP-632 adjusts keys 13-24,

and so forth (Figure 6.1). If you do not want to use an LCP-632 with certain keys, you must

program the KP-632 to skip those keys.

Figure 6.1

LCP-32 correspondance to KP-32 and EKP-32

For example, you may not want to use LCP-632s with the KP-632 but do want to use them with

an EKP-632. In this case, you must turn off LCP usage for keys 1-24 as follows:

1 Select

LCP-632

, then tap PGM.

1-12: Yes

displays. This indicates that the first connected LCP-632 will attach to keys 1-12.

3 Tap PGM.

1-12: Skip

displays. This indicates that the first connected LCP-632 will skip keys 1-12 and

will attach to the next available row of keys.

5 Tap ↓↓ to display

13-24: Yes

6 Tap PGM.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 113 114

Kommentare zu diesen Handbüchern

Keine Kommentare

RTS XCP-24 Wartungshandbuch Seite 51

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Türsprechanlagen RTS XCP-24