RTS XCP-24 Wartungshandbuch PDF herunterladen (Seite 47)

6-9

Key Option Menu, Solo

A solo key will cause all other keys to turn off when activated. You can assign one solo key.

1 Select

Solo

then tap PGM.

Tap Key

displays.

3 Tap a key. Both LEDs for the key will light red to confirm the assignment. Tap the key again if

you made a mistake and want to remove the assignment.

4 Tap CLR when finished.

5 Activating the solo key should now cause all other activated keys to turn off. The keys will turn

back on again when you turn off the solo key.

6 Run Service Menu, Save Cfg, to store the Solo setting.

Note

The solo option will continue on a key even if you change the key assignment.

Removing the solo key option

1 Select

Solo

, then tap PGM.

2 The LEDs for the solo key will be lit red.

3 Tap the solo key to turn off the LEDs.

4 Tap CLR to exit.

5 The solo key is now cleared.

6 Run Service Menu, Save Cfg, to save the change.

SERVICE MENU

Service Menu, Aux Inputs

Enables or disables an AUX input audio path to any outputs.

1 Select

Aux Inputs

, then tap PGM.

2 Aux In 1 displays. To select Aux In 1 or 2, press ↓↓ .

3 Tap PGM.

4 →

Enabled

displays.To select enabled or disabled, press ↓↓. The arrow indicates that the input

is enabled.

5 Tap PGM

6 Tap CLR to exit when finished

7 The new Aux In assignment is now set.

8 Run Service Menu, Save Cfg, to store the Aux Inputs setting.

9 To assign the destination of the Aux Inputs, see the Mixing entry for “Service Menu, DSP

Func”.

Service Menu, Dim

This item causes the speaker or headphone level to diminish by a specified amount whenever a

talk key is activated.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 113 114

Kommentare zu diesen Handbüchern

Keine Kommentare

RTS XCP-24 Wartungshandbuch Seite 47

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Türsprechanlagen RTS XCP-24