
25
RVON-I/O Command Table
TABLE 10. RVON-I/O Command Table
Command Parameter 1 Parameter 2 Description
show rvon
Shows RVON-I/O IP Address and other
general information.
show channel
Shows destination address and connection
information.
show serial Shows serial port setting.
show gpio Shows gpio settings.
show panel
Shows the channel control settings (poll id
and baud rate).
show emac Shows Ethernet settings.
set rvon
Help screen which lists all “set rvon”
commands.
set rvon ip_addr X.X.X.X Set the IP Address for the RVON-I/O.
set rvon net mask X.X.X.X Set the Network Mask for the RVON-I/O.
set rvon gateway X.X.X.X
Set the Gateway IP Address for the RVON-I/
O.
set rvon user username
Set the RVON-I/O user name for Telnet
access.
Default = telex
set rvon password password
Set the RVON-I/O password for Telnet
access (8-40 characters).
Default = password
set rvon vad_threshold adaptive (#)
Set the VAD threshold (silence detection).
Adaptive refers to autoselect. The # can be -
20 to +10 dBm.
set channel
[chan]
Help screen, which lists all “set chan”
commands (0-7). This refers to VOIP
channel setting.
set channel
[chan]
dest_ip X.X.X.X
Set the destination IP Address for this
particular RVON channel.
set channel
[chan]
dest_type X X = 0 (rvon-8), 1 (rvon-1, 2 (rvon-I/O
set channel
[chan]
dest_chan X
Set the destination channel - the port on the
far end (0-7).
set channel
[chan]
chan_codec X
Set the profile to use which includes the
compression codec (0-27) (see Table 10 on
page 25).
set channel
[chan]
input_gain X
Set the input gain for the specified channel -
14 to +14dB
set channel
[chan]
output_gain X
Set the output gain for the specified channel -
14 to +14 dB.
Kommentare zu diesen Handbüchern