RTS XCP-48-RJ45 Bedienungsanleitung PDF herunterladen (Seite 28)

Threshold adjust slider The Threshold Adjust slider allows you to set the vox threshold by moving

the slider right (increase) or left (decrease).

NOTE: This sets the threshold to the level you set by the slider bar. It

does not increase or decrease the threshold from the individual

port starting dB.

1. Slide the threshold slider bar to the level you want to set the port (s) selected.

Set To button The Set To button activates the Threshold Level slider selection. The Set To

button must be clicked to accept the threshold level.

1. Once the threshold slider is at the desired threshold level, click Set To.

Hold Time

Adjust arrow keys Use the UP or Down arrow keys to increase or decrease the time the port is

active from meeting the threshold level set above. Once a port meets or

exceeds its threshold level, the hold time determines how long that port will

stay active before closing (up to 12.5 seconds). You can see the adjustments

in the parameter display window (to the right)

NOTE: You can select multiple ports to change at the same time.

However, when you increase or decrease the hold time of

multiple ports the time changes from each port’s starting point.

For example, Port 002 has a hold time of 0.7 seconds and Port

010 has a hold time of 1.0. If both are selected and the hold

time is increased by clicking the up arrow twice the ending

threshold for each port would be as follows:

Port 002 = 1.7

Port 010 = 2.0

Hold Time display box The

Hold Time display box displays the hold time level selected by the

slider bar below.

Hold Time Adjust slider The Hold Time Adjust slider allows you to set the time by moving the

slider right (increase) or left (decrease).

NOTE: This sets the threshold to the level you set by the slider bar. It

does not increase or decrease the threshold from the individual

port starting dB.

1. Slide the hold time slider bar to the level you want to set the port (s) selected.

Set To button The Set To button activates the Hold Time slider selection. The Set To

button must be clicked to accept the hold time.

1. Once the hold time slider is at the desired level, click Set To.

Options

Show Enabled

Only

check box The Show Enabled Only check box, when selected will only display the Vox

enabled

ports in the display list to the right. When the check box is cleared,

all ports are displayed.

Real-Time

Changes

check box The

Real-Time Changes check box allows you to see the adjustments to the

Vox and hold time dynamically on the connected device (Cronus or AIO-

16).

NOTE: When making adjustments from the front panel of the Cronus

take into consideration that AZedit has a 5 second display

refresh rate which will cause a delay in what is seen in the

application.

SCREEN ITEM FIELD TYPE DESCRIPTION

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 106 107

Kommentare zu diesen Handbüchern

Keine Kommentare

RTS XCP-48-RJ45 Bedienungsanleitung Seite 28

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Türsprechanlagen RTS XCP-48-RJ45