RTS XCP-40-RJ11 Installationsanleitung PDF herunterladen (Seite 15)

WARNING: DIP Switches 1, 6, and 8 should always be left in the OPEN position. These are reserved for debugging and can have unintended consequences if not left in the

OPEN position.

TABLE 2. MCII-e Factory set DIP Switch Settings

DIP Switch 1 Debug Only! Must be in OPEN position.

DIP Switch 2

Sets the baud rate for AZedit serial connection via J1.

By default, AZedit is set for COM1 and 38,400 kbps (38.4k). The baud rate set in AZedit must

match the baud rate setting of the Master Controllers in ADAM.

Default: OPEN

OPEN: 9600 baud

CLOSED: 38.4k baud

DIP Switch 3, 4, and 5 Reserved, keep in OPEN position.

DIP Switch 6 Debug Only! Must be in OPEN position.

DIP Switch 7

Determines the Master / Slave Frame in a multi-frame system

Default: CLOSED

OPEN: Slave Frame

CLOSED: Master Frame

DIP Switch 8 Debug Only! Must be in OPEN position.

TABLE 3. Relationship between Audio Input/Output Cards, Intercom Ports, and Logical Keypanel Numbers

Logical

Keypanel

Number

Intercom Port Numbers, Grouped by Audio I/O Card Numbers

AIO

1 1 9 1725334149576573818997105113121129

2 2 10 18 26 34 42 50 58 66 74 82 90 98 106 114 122 130

3 3 11 19 27 35 43 51 59 67 75 83 91 99 107 115 123 131

4 4 12 20 28 36 44 52 60 68 76 84 92 100 108 116 124 132

5 5 13 21 29 37 45 53 61 69 77 85 93 101 109 117 125 133

6 6 14 22 30 38 46 54 62 70 78 86 94 102 110 118 126 134

7 7 15 23 31 39 47 55 63 71 79 87 95 103 111 119 127 135

8 8 16 24 32 40 48 56 64 72 80 88 96 104 112 120 128 136

NOTE: For AIO-16 cards, see the AIO-16 User Manual (p/n 9350-7726-000).

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 57 58

Kommentare zu diesen Handbüchern

Keine Kommentare

RTS XCP-40-RJ11 Installationsanleitung Seite 15

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Türsprechanlagen RTS XCP-40-RJ11