RTS XCP-ADAM-MC Wartungshandbuch PDF herunterladen (Seite 87)

Telex Communications

GPI In

General Purpose Inputs and Outputs (GPIO or GPI) controls devices that use switch contact closures, DC

voltages, or similar methods. GPI Inputs can be used to activate key assignments. For example, a lighting system

can be controlled from keypanel keys or key a transmitter during transmission. GPI Inputs can also be used as inputs

to UPL statements. For example, you could program a console switch to load an entirely new intercom system setup

file.

ADAM and ADAM CS intercom systems have a General Purpose Interface (GPI) port. GPI ports have eight control

outputs (also referred to as relays) and eight control inputs. The location of the GPI port on the ADAM and ADAM CS

is as follows:

ADAM: Located on XCP-ADAM-MC Master Controller Breakout Panel, J11.

ADAM CS: Located on ADAM CS back panel, J903.

GPI Port Pin-out

All 25-pin GPI Port connectors have the same pin-out as follows:

Pin No. Function Pin No. Function

1 GPI In #1 (+5 to +18 VDC)

2 GPI In #2 (+5 to +18 VDC)

3 GPI In #3 (+5 to +18 VDC)

4 GPI In #4 (+5 to +18 VDC)

5 GPI In #5 (+5 to +18 VDC)

6 GPI In #6 (+5 to +18 VDC)

7 GPI In #7 (+5 to +18 VDC)

8 GPI In #8 (+5 to +18 VDC)

9 Common

10 Common

11 Common

12 Common

13 Common

14 GPI Out #1

15 GPI Out #2

16 GPI Out #3

17 GPI Out #4

18 GPI Out #5

19 GPI Out #6

20 GPI Out #7

21 GPI Out #8

22 Common

23 Common

24 Common

25 Common

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 181 182

Keine Kommentare

RTS XCP-ADAM-MC Wartungshandbuch Seite 87