RTS XCP-ADAM-MC Wartungshandbuch PDF herunterladen (Seite 18)

c. Tap the TIF talk key. The TIF key talk and listen indicators will turn off and the TIF-951 "OFF"

LED will activate. The TIF-951 is now ready for another call.

KP9X Redial Sequence

☞

The last dialed phone number is always stored at the TIF and over-writes any previously dialed phone

number. If several people have access to the TIF, redial may not produce the results that you expect!

1. Tap the

PHONE

key to activate dialing mode.

2. Tap "up" on the TIF key to activate listen.

3. Tap

CLR

. The last phone number will redial.

4. After the number has dialed, click the

PHONE

key to end dialing mode.

5. If the far end answers, tap "down" on the TIF key to activate talk.

6. Use the KP9X hang-up sequence, page 17, when finished with the call.

KP9X Autodial Sequences

☞

Unlike the autodial operations using the KP-32 menu system (page 20), which store telephone numbers

locally within the KP-32, the KP9X autodial operations work with telephone numbers that are stored at

the TIF-951. The advantage to saving at the TIF-951 is that many users can access a common set of

stored telephone numbers. A disadvantage is that users can easily over-write important telephone

numbers. Also, telephone numbers at the TIF-951 are stored in volatile memory and will be lost if the

TIF-951 loses power.

Storing an Autodial Number in the TIF-951

1. Tap the

PHONE

key.

2. Tap the TIF talk key to latch it on.

3. Using the number keys on the keypad, dial the phone number that you want to store. The entire phone

number sequence can have up to 30 digits.

☞

To insert one or more pauses anywhere in the dialing sequence, enter

CLR

for each

pause. A pause may be required, for example, if you need to enter a digit to get an outside line and

your phone system requires a pause before continuing to dial. If you are using credit card dialing,

several pauses may also be required between the phone number and your personal access code.

4. After dialing the telephone number, click

CLR

PGM

, then enter a two-digit number (01, 02, etc. up to

32) that you will use as the autodial number.

5. After storing the autodial number, hang up using the KP9X hang-up sequence, page 17.

Dialing an Autodial Number Stored in the TIF-951

1. Tap the

PHONE

key to activate dialing mode.

2. Tap "down" on the TIF talk key to latch it in the on position.

3. Tap

CLR

followed by the autodial number (01, 02, etc.).

4. When finished dialing, click the

PHONE

key again to exit dialing mode.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 57 58

Kommentare zu diesen Handbüchern

Keine Kommentare

RTS XCP-ADAM-MC Wartungshandbuch Seite 18

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Türsprechanlagen RTS XCP-ADAM-MC