RTS KP-97 Wartungshandbuch Seite 14

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 52
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 13
4 BASIC INTERCOM OPERATION
4.1 KEYS AND DISPLAYS
Keys that are assigned for talk, or talk+listen
are indicated using UPPER CASE letters in
the alphanumeric displays above the keys.
Keys that are assigned for listen-only are
indicated using lower case letters.
For momentary activation of a key press
and hold the key. Then, release it when
finished.
For latching operation, tap the key; it
will turn on and remain on. Tap the key
again to turn it off when finished.
For lever keys only: You can
independently activate talk and listen by
tapping up or down.
4.2 TALK AND LISTEN
INDICATORS
The talk and/or listen indicators turn green
when a key is activated, depending on the
key’s assignment. For example, if the key is
assigned for talk but not for listen, only the talk indicator will turn green when the key is pressed;
if the key is assigned for talk + autolisten, both indicators will turn green when the key is acti-
vated. If there is no key assignment, the key will not activate.
The talk indicator also provides some other indications as follows:
Continuous red “in use” indication: An “in-use” indication is provided for IFB and ISO keys.
An “in-use” indication is also provided for keys that are assigned to destinations in remote inter-
com systems (when your intercom system is equipped with optional trunking). If another keypanel
is currently talking to any of these destinations, and you have a key assigned to the same destina-
tion, the talk indicator in that key will light red to indicate “in-use”. If you activate the key and it
turns continuous green, this indicates that you and the other keypanel operator are both talking to
the destination. If the indicator flashes green when a key is activated for an IFB or a remote desti-
nation, this indicates that the other keypanel has a higher priority and you cannot talk to that
destination at the current time.
Red flashing “incoming call” indication: If the talk indicator in a key starts to flash red, this in-
dicates that the destination assigned to that key is calling you. Activate the key as described above
to talk back.
You can adjust the amount of time that displays will flash for incoming call indication. See
“SERVICE MENU, TALLY”, page
46.
14 User Manual, DKP-8, DKP-12 and KP-12 Keypanels with Push-button Keys
DIR1
dir1
Display for
Talk Key
Display for
Listen-only key
Alphanumeric Display Indications
Talk
Indicator
Listen
Indicator
L
T
Push-button
Key
Lever
Key
Listen
Indicator
Talk
Indicator
Intercom Key Indications
Seitenansicht 13
1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 51 52

Kommentare zu diesen Handbüchern

Keine Kommentare