RTS KP-12 Bedienungsanleitung PDF herunterladen (Seite 12)

4 Menu List for DKP-8, DKP-12, and KP-12 Keypanels KP-12 Keypanel

Bosch Security Systems, Inc.

User Manual

F.01U.193.243

Rev. 11

MENU MODE

See “Menu Mode”

on page 29.

In the top level menu, tap SELECT on MENUS to turn on the MENU indicator. Then, turn SELECT to view the following menus. Tap the SELECT

control to select a menu to view items in that menu.

AUTODIAL Menu Stores autodial numbers for use by a phone or autodial key.

KEY ASGN Menu

AUTODIAL Assigns a key to dial a specific autodial number that was entered using the AUTODIAL menu, above.

AUTOFUNC Assigns any of the available auto functions (also called special functions) to a key.

CLEAR Clears talk/listen assignments. (Does not clear key options, see “CLR OPT” in KEY OPT menu.

COPY Copies one key’s assignment to another key

LISTS

ICOM Accesses another intercom system for key assignment (trunked intercoms only).

PL Accesses party line list for key assignment

GRP Accesses group list for key assignment

IFB Accesses IFB list for key assignment.

ISO Accesses ISO list for key assignment.

P-P Accesses point-to-point list for key assignment.

RLY Accesses the intercom system’s list of relays for key assignment.

SPCL Accesses special lists for key assignment.

UPL Accesses UPL resources for key assignment.

LOCAL I/O Assigns relays or open collector outputs to keys. (Appears only on KP-12 with GPI module options.)

PHONE Assigns an all-purpose phone key for use with TIF Telephone Interface.

REDIAL Assigns a redial key for use with a TIF Telephone Interface.

KEY OPT Menu

BTN LOCK Locks intercom keys in the ON or OFF position, or unlocks them.

CHIME Adds a chime tone to an intercom key for incoming call announcement.

CLR OPT Clears all options from a key.

COPY Copies one key’s options to another key.

EXCLUSIVE Assigns keys for use with the exclusive key option.

GROUP 1-4 Assigns several keys for simultaneous activation when a group master key is activated.

LATCHING Turns the latching feature ON or OFF for selected keys.

SOLO Assigns a key that, while activated, will temporarily turn OFF all other active keys.

SERVICE Menu

DIMMER Adjusts brightness of displays.

FOOT SW Enables or Disables the use of the foot switch. (Only available if the GPI board is installed)

KEY TYPE Select push-button or lever style keys, whichever the keypanel has.

LOCK Locks out access to all SERVICE menu items, and locks HDST / SPKR / PRGM selection.

MIC CNTL Selects microphone input from either a headset, panel mic or from the EXT MIC IN connector.

MIC COMP Adjusts the MIC compression of the audio source.

MIC GAIN Adjusts the mic gain.

MOD ASGN Defines which keys occupy which positions on the keypanel and expansion panels.

MUTE LVL Adjusts the amount of listen muting when talk keys are activated.

OPTO-ISO Assign opto-isolator inputs to actuate keys, pages, etc. (KP-12 with GPI module only.) See “Menus, SERVICE,

OPTO-ISO (KP-12 with GPI Module Only)” on page 51.

OUT CTRL Assigns whether you listen to audio through either HEADSET or SPEAKER

RESET Clears all settings that are saved locally at the keypanel.

SAVE CFG Saves all local settings.

SET ADDR Sets the logical keypanel number, or keypanel address.

SIDETONE Adjusts the level of your own voice in headphones when talking. Also adjusts chime tone level.

TALLY Provides adjustable flashing indication for any destination that is communicating with the keypanel.

TEST PNL Tests keys, controls and displays.

TONE Activates an internal tone generator. Used to test the talk and listen paths.

USM Activates hot mic to matrix and/or MIC PRE OUT connector of option Rear Connector Module.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 67 68

Kommentare zu diesen Handbüchern

Keine Kommentare

RTS KP-12 Bedienungsanleitung Seite 12

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Türsprechanlagen RTS KP-12