RTS BP-325 Bedienungsanleitung PDF herunterladen (Seite 5)

CHAPTER 1

CONNECTIONS AND OPERATION

This section describes operation of the BP325 as supplied from the factory. Use of an RTS power supply to power the intercom

system is assumed. For options and use of an alternate power source (See “PROGRAMMABLE OPTIONS” on page 3. and

See “ALTERNATE POWERING METHODS” on page 5..

CONNECTIONS

Headset

Connect a headset using one of the three headset connectors on the back panel. The MONO HEADSET and STEREO

HEADSET connectors are for monaural or stereo dynamic-mic headsets. The CARB-MIC HEADSET connector is for a

monaural carbon-mic headset. Refer to the specifications for pin-outs of these connectors if needed.

Intercom Channels

Connect the BP325 to the intercom system using the LINE INPUT connector on the back panel.

If desired, connect an additional intercom station to the intercom system using the LINE LOOP connector on the back panel.

1 2 3 4 5 6 7 8 9 10 ... 27 28

Keine Kommentare

RTS BP-325 Bedienungsanleitung Seite 5