RTS RVON-C Bedienungsanleitung PDF herunterladen (Seite 12)

Color Key Code

On the RVON-16 card, Telex has provided a color key code and knock-outs for digits 1-8 to ensure a compatible connection

between cards. The RVON-16 card color is blue, and will only insert into a blue coded backcard.

Addresses and the RVON-16 Card

Because the RVON-16 has an Ethernet interface, it is required to have a MAC (Media Access Control) address. This is a low

level address that contains 48 bits. Do not confuse this address with an IP (Internet Protocol) Address. In order to be IP

compliant, all cards must have a unique MAC ID when shipped from the manufacturer. Typically, the MAC ID of a piece of

hardware, such as the RVON-16 card, has a fixed or static address. Whereas, the RVON-16 card’s IP Address can change over

time.

The MAC Address uniquely identifies each node of a network and interfaces directly with the network media. The RVON-16

has a small 8-pin serial device on the board that the processor can read the unique MAC Address from. For more information,

on MAC IDs, contact technical support.

Switches and Connections

IMPORTANT: You must remove the card from the frame in order to change any DIP switch settings.

The RVON-16 card, unlike the RVON-8 card has two banks of eight DIP Switches.

FIGURE 3. The RVON-16 Color Key Code. This Key Code allows only the RVON-8 or RVON-16 to plug into a

blue coded, compatible backcard.

DIP Switch 1 AZedit Configuration Disable

CLOSED: Configuration via AZedit is disabled.

OPEN (Default): Configuration via AZedit is enabled.

Description: Disables configuration changes via AZedit. AZedit will still be able to view the RVON

configuration and status. The configuration can be changed via the serial and Telnet connections.

DIP Switch 2 Configuration File Save Location

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 48 49

Keine Kommentare

RTS RVON-C Bedienungsanleitung Seite 12