RTS KP95 Installationsanleitung PDF herunterladen (Seite 34)

34 ADAM CS Installation Manual

GPI Input Numbers* GPI Input Pin Numbers**

UIO-256

Frame #1

UIO-256

Frame #2

UIO-256

Frame #3

UIO-256

Frame #4

DC Control Input

“minus”

DC Control Input

"plus" (5-18 VDC)

1173349934

2 18 345010 35

3 19 355111 36

4 20 365212 37

5 21 375313 38

6 22 385414 39

7 23 395515 40

8 24 405616 41

9254157126

10 26 42 58 2 27

11 27 43 59 3 28

12 28 44 60 4 29

13 29 45 61 5 30

14 30 46 62 6 31

15 31 47 63 7 32

16 32 48 64 8 33

* Dependent on UIO-256 DIP Switch SW1 Settings for Input/Output Range as summarized in Table 8.

**Inputs will sink 100 mA max at a maximum input voltage of +18 VDC. For operation from an external DC voltage source,

connect the external control voltage to the "plus" pin, and connect the external common to the "minus" pin. The UIO-256

also has an internal 18 VDC source, which is available at pins 18 to 22. Ground is available at pins 24 and 25. To use the

internal 18 VDC source, ground the “minus” pin for the desired control input, then use an external switch to connect from

the 18 VDC internal source to the "plus" input pin.

Table 10. UIO-256 GPI Inputs Connector (J7)

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 40 41 42

Keine Kommentare

RTS KP95 Installationsanleitung Seite 34