RTS XCP-ADAM-MC Bedienungsanleitung

RVON-CRTS Voice Over Network for Cronus9350-7835-000 Rev C 03/2009

8FIGURE 2. Backcard - RVON-C FIGURE 3. RVON-C Backplate

9CHAPTER 2InstallationInstallation of the RVON-C Card into the Cronus SystemWhen inserting the RVON-C card into the Cronus system, the following consi

10Switches and ConnectionsIMPORTANT: You must remove the card from the frame in order to change any DIP switch settings on the front card, see Figure

11Configuring the RVON-C Card with AZeditOnce the RVON-C card is inserted into the Intercom, AZedit will automatically recognize the card.NOTE: Requir

123. From the RVON-C drop down list, select the slot in which the RVON-C card resides, if it is not already selected.4. In the IP Address field, enter

13RVON-C Connection Status ScreenThe RVON-C connection status screens display information pertaining to RVON-C channel connection. You can only show s

14Screen Item DescriptionSelect Local Card and ChannelRVON CardThe card for which you want to view the status.From the RVON drop down list, select the

15SCREEN ITEM DESCRIPTIONAttempts / DropsThe number of times a call attempt has been made and dropped.NOTE: The number of attempts should always be on

16SCREEN ITEMDESCRIPTIONVOIP Playout StatisticsPlayout Buffer SizeDisplays how much audio can be received from the network before packets are lost. Th

17SCREEN ITEM DESCRIPTIONNetwork StatisticsVoice Playout Packets(Tx/Rx)Displays the number of voice packets transmitted and received from the other si

PROPRIETARY NOTICEThe product information and design disclosed herein were originated by and are the property of Bosch Security Systems, Inc. Bosch re

18SCREEN ITEM DESCRIPTIONError CountsInvalid Headers Displays how many IP packets could not be parsed.Invalid MAC Address Displays how many invalid MA

19Screen Item DescriptionSERIAL TO ETHERNETThe Serial to Ethernet information shows the serial data that is received on the serial connection and tra

20View RVON-C Status from Cronus Front PanelNot only are you able to view at the status of the RVON-C from AZedit, but now you can also view the statu

21TABLE 2. RVON-C status descriptionsAction DisplayWhen Ethernet is selected:Link Up - Displays whether the Ethernet link is active or inactive. Link

22Download RVON-C Firmware through AZeditNOTE: AZedit sends the program directly to the RVON-C card over Ethernet. This is different from other I/O ca

236. Click Open.The Download Device Firmware window appears.7. Click Begin Download.The download begins.8. Click OK.The RVON-C firmware download is co

24J7J8GPIO J9GPIOJ9LINE 1LINE1LINE 2LINE29-169-1625-321-81-817-24J5J2J6J4J1J3POWER 1POWER 1POWER 2POWER2ENC 2ENC2ENC 1ENC 187 6 54 321CRONUSDigital Ma

25CHAPTER 3RVON-C CardSerial Port ProgrammingRVON Serial and Telnet CommandsRVON card programming can be done via direct serial or telnet connection.

26*****************************RVON-C Revision 1.00.02(C) Copyright 2003 Telex Inc. All Rights Reserved.Flash File System initialized.DIP Switch setti

27Creating RVON application...-> Bringing DSP subsystem out of reset...DSP Daughtercard type is set to NONE - No DSP Daughtercard Found0000004883 -

TableofContentsINTRODUCTION ... 3Description of the RVON-C VoiceOver Network Card ...

28Access Serial Command ModeThere are many different serial port commands supported from here but it is NOT recommended that any be used EXCEPT:dbgcmd

29Serial Command TableTABLE 3. Serial Command TableCommand Variable 1 Variable 2 Descriptionset rvon Help screen which lists all “set rvon” commands.s

30RVON-C Default SetupEvery attempt is made to ensure the board is shipped from the factory containing the following:All are “set rvon” commandsThere

31CHAPTER 4RVON-C Quick StartThis guide explains briefly how to install and configure an RVON-C card in a Cronus system. It contains the following sec

32Launch AZedit and Connect to the Cronus FrameNOTE: You can connect to Cronus using a Serial, USB or Network Connection. The following instructions s

334. Highlight Cronus in the Intercoms window and click OK.5. Click OK when the Configuration Change message appears.6. You will now see CRON in the l

34Configure the RVON-C CardOnce you have a connection to Cronus, you are now ready to configure the RVON-C card within the Cronus system.To configure

3510. From the Device Type drop down list, select the type of device to which the RVON-C card is connecting.11. From the Device Channel drop down list

36• For RS232, jumper pins 2 & 3 of J10, J11, and J12• For RS485, jumper pins 1 & 2 of J10, J11, and J123. Once you have set the correct confi

37APPENDIX ABasic Network ConfigurationBasic Network ConfigurationThis section covers basic network configuration set-up and testing. Also covered are

38WIDE AREA NETWORKA wide area network (WAN) connects two or more LANs and can span a relatively large geographical area. For example, Telex Headquart

39ACCESSING THE WIDE AREA NETWORK (WAN)Figure 3 shows LAN IP Addresses using a common IP Address, 10.2.100.X (192.168.X.X is another common address).

40Amazingly, all the address translation that occurs takes place automatically in order to make web browsing and other functions easier. This is also

41IP ADDRESSESIf you do not know your IP Address, you can open a DOS screen in a Windows®- based environment and bring up the ipconfig screen.To find

42Ping a ComputerPinging a computer on the network makes sure it is able to be “seen” and receive messages on the network.NOTE: You can also ping your

432. At the prompt, type tracert and type the url or IP Address you want to trace.3. Press Enter.The details of the tracer route are displayed.NOTE: Y

44Below, is an example of a router configuration screen. Not all routers are configured the same way and may not look exactly like this screen.NOTE: L

45Network TerminologyBridge A bridge is a device that connects two LANs, or two segments of the same LAN that use the same protocol. Sometimes called

46LAN A LAN is a computer network that connects a relatively small area (a single building or group of buildings). Most LANs connect work stations and

47

3CHAPTER 1IntroductionDescription of the RVON-C Voice Over Network CardInstalled directly into the Cronus Intercom frame, the RVON-C provides voice ov

49APPENDIX ARVON Trunking ConnectionsIn this chapter you will find the following drawings:• AZedit Via RVON-8 RS-232 Mode• CS9500 Trunking Via RVON-I/

50

51Figure 8: AZedit Via RVON-8 RS-232 Mode

52Figure 9: CS9500 Trunking Via RVON-I/O To RVON-8

53Figure 10: ADAM Trunking Via RVON-8

54Figure 11: Zeus II Trunking Via RVON-I/O to RVON-C

55Figure 12: Cronus Trunking Via RVON-I/O To RVON-8

56Figure 13: RVON-16 Trunking

57Notes

4FeaturesSpecificationsDIGITALNOTE: The Playout Delay and Bandwidth depend on the configured amount of audio per packet.Installation The RVON-C card i

5Default Ethernet IP AddressesCONNECTIONS - PINOUTSRJ-45 Ethernet via backcardDB-9 Serial Port via backcardTABLE 1. Default Address for the RVON Produ

6Power.........

7FIGURE 1. Frontcard - RVON-C 9030-7835-000